ABSTRACT The malt bagasse is a solid residue, highly produced in the brewing industry. The presence of high levels of antioxidants in its composition makes this residue an attractive possibility as a corrosion inhibitor, besides being a sustainable and low cost alternative to the inorganic procedures currently used to prevent corrosion. In this sense, this work evaluated the efficiency of the malt bagasse powder as a corrosion inhibitor on the surface of AISI 1020 carbon steel, in different concentrations, in acidic medium 0.5 mol.L-1 HCl. The resistance to corrosion was tested by electrochemical techniques, such as electrochemical impedance spectroscopy (EIS) and anodic and cathodic polarization curves. The efficiency of the corrosion inhibitor was evaluated by weight loss tests. Fourier transform infrared spectroscopy (FTIR) and optical microscope surface image analysis were respectively used as chemical and morphological characterization techniques, respectively. From the EIS results, it can be said that the powder has its efficiency increased once the concentration is higher. On the other hand, the polarization curves shows the malt bagasse powder as an inhibitor presents both anodic and cathodic behavior. The weight loss results confirmed the electrochemical results, showing 92.5% efficiency for the 1.77 g.L-1 concentration. The adsorption isotherm on the steel surface follows Languimir’s Isotherm. The FTIR analysis indicates the presence of heteroatoms such as C, N, O, incorporated in functional groups that could be responsible for the inhibitory properties found in the powder. The images obtained from the optical microscope, showed that the corrosion process, in the presence of the inhibitor in the electrolyte, is retarded. Therefore, the results indicate that the malt bagasse powder has the potential to be a corrosion inhibitor for steel in acidic medium, adding value in the beer production chain.

ABSTRACT In this work, the wettability of the galvannealed surface pretreated with the hybrid silane APTES/GPTMS film was measured by sessile drop method. The coatings were applied on the substrate from dip-coating method and dried in an oven. The study followed an experimental factorial design, 3³, with contact angle as response. The corrosion resistance was evaluated by electrochemical techniques and the surface morphology was characterized by scanning electron microscopy. The wettability results showed the best condition for galvannealed steel pretreated with the hybrid silane film for 2:1 APTES:GPTMS ratio, 2% silane concentration and 150 min of hydrolysis time, because the result may be related to a higher rate of hydrolysis of the silanes that is influenced by both the functional group present and by the type and number of hydrolyzed groups, resulting consequently in a higher availability of silanol groups in solution, promoting a greater crosslinking of the film on the metallic substrate.

RESUMO Silanos são compostos organo funcionais utilizados como agentes de acoplamentos entre interfaces orgânicoinorgânicas, com boas propriedades de adesão. Por esta razão, o uso de silanos como pré-tratamento para aços, vem ganhando espaço já que também são geradores de resíduos de menor toxidade ao meio ambiente e à saúde humana. Para melhorar a barreira de proteção do filme de silano e conferir propriedades de autorreparação, esses filmes podem ser modificados com íons cério. Assim, esse trabalho tem como objetivo avaliar a resistência à corrosão do filme de silanoviniltrimetoxisilano (VTMOS) modificado com íons Ce(III) ou íons Ce(IV) aplicado em aço carbono, utilizando a espectroscopia de impedância eletroquímica (EIE), técnica de varredura por eletrodo vibratório (Scanning Vibrating Electrode Technique -SVET), microscopia eletrônica de varredura (MEV) e transformada de Fourier de espectroscopia na região do infravermelho (Fourier Transform Infrared Spectroscopy -FTIR). Os resultados mostraram que os filmes com adição de íons Ce(IV) apresentaram uma melhor resistência à corrosão se comparados aos filmes com íons Ce(III), isto porque o filme formado com a adição de íons Ce(IV) mostrou um melhor efeito barreira devido à uma maior reticulação do filme.

ABSTRACT Silanes are organo functional compounds used as coupling agents between organic-inorganic interfaces, with good adhesion properties. For this reason, the use of silanes as pre-treatment for carbon steel is becoming more and more applicable , since they are also generators of less toxicity residues to the environmental and human health. In order to improve the barrier protection of the silane film and confer self-healing properties, these films can be modified by addition of cerium ions. Thus, these work aims to evaluate the corrosion resistance of vinythrimethoxysilane (VTMOS) film modified with Ce(III) ions or Ce(IV) ions for carbon steel, using the electrochemical impedance spectroscopy (EIS), scanning vibrating electrode technique (SVET), scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR). The results show that Ce(IV) ions addition improved better corrosion resistance than the films with Ce(III) ions. The higher barrier effect is since the film formed in the presence of Ce(IV) ions is better reticulated.

This work addresses the use of piassava fibers (PF) as reinforcement for recovered polypropylene (PPr) in the manufacturing of composites. The composites were molded with variable amounts of PF (10, 20 and 30 wt%), with and without maleic anhydride functionalized polypropylene (MAPP) (10 wt%) as compatibilizer. The composites were characterized using mechanical tests (flexural, tensile, impact and hardness), thermal analyses (thermogravimetric analysis and differential scanning calorimetry), along with evaluations of heat deflection temperature, melting flow index, density and morphology. Tensile and flexural strength of composites increased with PF content, but impact strength decreased, since the material became stiffer. The use of MAPP in the formulations yielded superior properties, showing good fiber/matrix interaction. In all, the use of PF as reinforcement in PPr was considered an interesting way of reducing solid waste and to reinforce plastics, being a possible alternative for the substitution of wood in WPC composites.

ABSTRACT Metallic corrosion can be delayed using corrosion inhibitors. However, several industrial corrosion inhibitors are toxic and harmful to the environment and to the human health. In this context, in the last decades, research has been developed to investigate the performance of low toxicity corrosion inhibitors as green inhibitors obtained from vegetables, which are environmentally acceptable. The present work studied the corrosion inhibition efficiency of peel garlic extract (Allium sativum. L.) for possible replacement of benzotriazole (BTAH) on the corrosion inhibition of ASTM 1020 carbon steel (CS-1020) in 0.5 mol. L−1 hydrochloric acid media. Weight loss measurements, anodic and cathodic potentiodynamic curves and electrochemical impedance (EIS) experiments were carried out. The Fourier transformed infrared spectroscopy (FTIR) was carried out to evaluate the chemical compounds. The morphological characterization was obtained to observe the inhibitor effect in the corrosion products on substrate surface. The results showed that the addition of both inhibitors effectively hinder the corrosion process and indicated their adsorption on the electrode surface. The inhibiting efficiency of the peel garlic extract was only slightly inferior to BTAH showing that the former inhibitor can be an environmentally friendly option to toxic inhibitors. The FTIR analysis showed the presence of chemical compounds which presents antioxidant properties.

The study of conducting polymeric membranes is decisive in some areas, as in fuel cells and electrodialysis. This work aims the study of membranes using conventional and conductive polymers blends. Two types of polyurethane were used as conventional polymers, commercial thermoplastic polyurethane and polyurethane synthesized from castor oil and 4-4-dicyclohexylmethane isocyanate. Two kinds of conducting polymers were used, polyaniline doped with organic acid and a self doped polyaniline. The polymers and the membranes were characterized by electrical conductivity, Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA) and scanning electron microscopy (SEM). The synthesis of the membranes produced was proper, featuring a complete reaction, analyzed by FTIR. The membranes also showed good mechanical properties and thermal stability (≈ 220 °C). Among the membranes studied, the polyaniline doped with p-toluenesulphonic acid obtained higher thermal and viscoelastic properties. Thus they can be used in separation techniques using membranes.